Portable Hydraulic Hose Crimper Pipe Crimping Machine With 8 Sets Dies

Specification:

Type: Manual hydraulic hose crimper machine

Application:  Compression of the hose connector of the high-pressure oil pipe Crimping inner diameter : 0.24-1.1 Inch Number of molds : 8 Sets (10mm, 12mm, 14mm, 16mm, 19mm, 23mm, 27mm, 31mm)

Type of lubricating grease: Manual pump with No. 10 engine oil

 

Product Description​:

Portable Hydraulic Hose Crimper Pipe Crimping Machine With 8 Sets Dies

Specification:

Type: Manual hydraulic hose crimper machine

Application:  Compression of the hose connector of the high-pressure oil pipe
Crimping inner diameter : 0.24-1.1 Inch
Number of molds : 8 Sets (10mm, 12mm, 14mm, 16mm, 19mm, 23mm, 27mm, 31mm)

Type of lubricating grease: Manual pump with No. 10 engine oil

 

Product Description​:

【8 SIZES OF DIES】 The eight-flap seat in the hydraulic hose crimping tool is forged with chrome 12 material and hardened by heat treatment, which is more wear-resistant and precise, and the snap-on dies. (10/12/14/16/19/23/27/31mm) can bite with the eight-flap seat perfectly and firmly, which can provide the stability for the crimped hose, crimping range 0.24"-1.1".
【CHROME 12 MATERIAl】The head is made of chrome 12 high hardness material, wear-resistant, built-in double-layer dust-proof with long life, the bottom of the machine is made of stainless steel, rust-resistant and corrosion-resistant, compact structure, easy to operate and maintain, the hose crimper comes with a 8 drawer box design for placing the molds, saving space.
【APPLICABLE SCENARIO】 It can be easily taken to any place, the ac hose crimper is suitable for all kinds of mechanical high and low pressure oil pipe, air pipe, water pipe, cable connector. Specifically designed for field service work when repairs and or final installs must be made on-site. If you have any questions about the product, please feel free to contact us.

 

Package List:

1 x Hydraulic Hose Crimping Machine with 8 sets Magnetic Dies

 

Notes:

The mold is of the sliding slot type and is a non-magnetic mold. After receiving the product, you need to tighten the air release valve, turn on the inflation switch, adjust the limiter to the far left, and the light should be normally on. Then you can use it normally. The error can be adjusted by the limiter.

Due to manual measurement,please allow a little error and make sure you do not mind before ordering.

Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object.

Please take the real one as standard.

Item SpecificsBrand findmallMPN LAW236856Type Hydraulic Hose Crimper MachineNumber of molds 8 SetsVoltage Manual modelModel Hose Pipe CrimpingCutting Range 0.24"-1.1"Features PortableItem Diameter 10/12/14/16/19/23/27/31mmWarranty 1 Year
Payment

Shipment

Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .

Delivery time :

When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

Warrenty & RMA

Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

Service & Contact

We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.

[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

HeadlightSuspensionWindow Visors

Shop Category Store Home  Suspension & Steering  Lighting & Lamps ◈  Fog Lights ◈  Xenon Headlight Ballast ◈  Headlight ◈  Fog Lamps cover ◈  Turn Lights ◈  Brake Lights ◈  Moto Lighting & Lamps ◈  Others ◈  Tail Lights  Carburetor ◈  Lawn Mowers Carburetor ◈  String Trimmers Carburetor ◈  Blower Carburetor ◈  Snow Blower Carburetor ◈  Snowthrower Carburetor ◈  Saw Carburetor ◈  Tractor Carburetor ◈  Motorcycle Carburetor ◈  ATV Carburetor ◈  Automobile Carburetor ◈  Others ◈  Golf Carburetor ◈  Gasket ◈  Rebuild kit ◈  Intake Manifold Boot  Radiators  Fans & Kits  Auto Valve ◈  Pressure Relief Valve ◈  Air Idle Valve ◈  VVT Valve ◈  Transmission Solenoids ◈  Control Valve ◈  Transmission Solenoids Valve ◈  EGR Valve ◈  Selector Valve ◈  Others  Motorcycle Valve ◈  Motorcycle Solenoid Valve ◈  Motorcycle fuel Switch Valve ◈  Others  Fuel Injector  Brakes & Brake Parts ◈  Brake Master Cylinder ◈  Clutch & Clutch Parts ◈  Motorcycle Hand Brake Handle ◈  Motorcycle Brake Cable ◈  Motorcycle Brake Pads ◈  Others  Car Repair Kit  Auto Engine System ◈  Valve Cover & Gasket ◈  Oil Cooler ◈  Engine Timing Cover ◈  Thermostat ◈  Turbine Cover ◈  Automobile Heaters&Accessories ◈  Engine Coolant Recovery Tank ◈  Hydraulic Roller ◈  Glow Plug ◈  Filter Housing &Accessories ◈  Tilt Trim Motor ◈  Engine Rocker Arm Shaft Sleeve ◈  Engine Hood ◈  Oil Scale ◈  Coolant Water Inlet Pipe ◈  Others  Auto Ignition System ◈  Spark Plug ◈  Car Ignition Coil ◈  Spark Plug Protective Cover ◈  Ignition Switch ◈  Car Ignition ◈  Car Ignition Module ◈  Others  Auto Hub ◈  Locking Hub ◈  Hub Bearing ◈  Wheel Spacers Adapters ◈  Others  Motorcycle Ignition System ◈  Motorcycle Ignition ◈  Motorcycle Ignition Coil ◈  Motorcycle Fuel Switch ◈  Motorcycle Hand Plate ◈  Motorcycle Ignition Switch ◈  Motorcycle Starter Fitting ◈  Motor Electromagnetic Starter  Motorcycle engine system ◈  Piston Cylinder Fittings ◈  Camshaft ◈  Others  Auto Actuator ◈  Air Conditioner Actuator ◈  Door Lock Actuator ◈  Eccentric Shaft Actuator ◈  Hood Catch ◈  AC Blower Motor ◈  Clutch Actuator ◈  Fuel Door Opener Actuator ◈  Others  Auto Motor ◈  Transmission stepper motor ◈  Power Window Lift Motor ◈  Transfer Case Gear Motor ◈  Front Running Board Motor ◈  Blower Motor ◈  Blower Resistor ◈  Others  Auto Inlet & Outlet System ◈  Air Filter ◈  Intake Exhaust Valves ◈  Throttle Body ◈  Power Brake Booster ◈  Exhaust And Intake Pipes ◈  Turbocharger ◈  Others  Auto Circuit Wiring Harness ◈  Positive Battery Cable ◈  Sensor Harness ◈  Body Wiring Harness ◈  Gear Shift Control Cable ◈  Battery Terminal ◈  Others  Transmission System ◈  Chain ◈  Shaft ◈  Gear ◈  Tensioner ◈  Belt ◈  Steering Power Hose ◈  Others  Auto Switch ◈  Door Power Window Switch ◈  Neutral Safety Switch ◈  Combination Lever Switch ◈  Parking Brake Switch ◈  Others  Motorcycle Control System ◈  Gearbox Shift Line ◈  Rectifier ◈  Relay ◈  Voltage Regulator ◈  Others  Auto Sensor ◈  TPMS Sensor ◈  Mass Air Flow Sensor ◈  Oxygen Sensor ◈  Knock (Detonation) Sensor ◈  Throttle Position Sensor (TPS) ◈  Vehicle Speed Sensor ◈  ABS Wheel Speed Sensor ◈  Fuel Pressure Sensor ◈  Crankshaft Position Sensor ◈  Oil Pressure Sensor ◈  Ride Height Sensor ◈  PDC Sensor ◈  MAP Sensor ◈  Exhaust Pressure Sensor ◈  Others  Motorcycle Pump ◈  Fuel Pump ◈  Brake Calipers ◈  Others  Auto Interior ◈  Plastic Rivets Fasteners ◈  Cargo Covers ◈  Door Panels ◈  Center Overhead Consoles ◈  Cup Holder ◈  Inside Door Handle ◈  Inner Door Panel Handle ◈  Cigarette Lighter ◈  Storage Box ◈  Air Conditioner Vent ◈  Others ◈  Seat Covers  Exterior Trimming Parts ◈  Roof Rack ◈  Running Boards/Side Steps ◈  Bumper Grille ◈  Fender Flares ◈  Front Bumper Grille Guard ◈  Door Handle ◈  Fuel tank cap ◈  Hinge ◈  Front Bumper ◈  Rear Bumper ◈  Motorcycle Decoration ◈  Others ◈  Windshield Wiper Blades ◈  Window Visors ◈  Auto body trim panel ◈  Front bumper trim  Auto Bump ◈  Auto Fuel Pump ◈  Auto Water Pump ◈  Power Steering Pump ◈  Others  Home & Garden ◈  Sports Goods ◈  Yard, Garden & Outdoor Living ◈  Others  Business & Industrial ◈  Industrial Control Module ▷  CNC  ♢  Edge finder  ♢  Drill Bits  ♢  Spring Collet  ♢  Boring Bar  ♢  Mandrel  ♢  Collet Chuck  ♢  Pull Stud  ♢  Quick Change Tool Post  ♢  Drill Chuck  ♢  Drill Chuck Arbors  ♢  Live center  ♢  Vise  ♢  Milling Arbor  ♢  Reamer  ♢  Blocks  ♢  Other ▷  Hand Tools  ♢  Rivet Gun  ♢  Wrenches  ♢  Hydraulic Crimper  ♢  Balance Level  ♢  Drill Bits  ♢  Outside Micrometer  ♢  Casters  ♢  Other ▷  Metalworking Supplies  ♢  Sanding Disc  ♢  Metal Cut Off Wheels  ♢  Flap Discs  ♢  Hose Clamp  ♢  Welding Wire  ♢  Cable  ♢  Piston Driver  ♢  Other ▷  Generator Accessories  ♢  Automatic Voltage Regulator  ♢  Generator Carburetor ◈  New Products Discount Zone  A/C Compressor & Clutch ◈  A/C Compressor Clutch ◈  A/C Compressor  OtherHot Item Heavy Duty Weed Barrier Fabric Woven Ground Weed Cover 3.2 Ounce Landscape USD 25.28 X-Tube Heat Shrink Wrap Tubing For Rod Grips-5 Color 14 Sizes 39"&64" Lengths USD 6.09 Stainless Steel Metal Garden Water Hose Pipe Flexible Lightweight 25/50/75/100FT USD 16.85 Nursery Garden Seedling Starting Container Plastic Plant Flower Pots 50/100 PACK USD 9.99 Carburetor 18.5HP For Briggs Stratton For Craftsman LT1000 LT2000 DYT4000 Z225 USD 12.06 New List Item For Bad Boy Mowers Chute System ACS6000B 088-6000-00 54" 60'' 61″ 72" Decks USD 106.05 4 Pack 6" Swivel Caster Wheels 2 With Side Brake And 2 Without Brakes Heavy Duty USD 64.33 4 Pack 6" Swivel Caster Wheels Grey Heavy Duty With Brake Inclined Fixed Wheel USD 51.17 3 Pack Mower Spindle For Husqvarna 539131898 532174375 Z248F MZ48 48-Inch Deck USD 84.82 Bucket Tilt Cylinder for Case IH Skid Steer Loader 1845 1845B 1845C 118110A1 USD 199.34 Portable Hydraulic Hose Crimper Pipe Crimping Machine With 8 Sets Dies

Specification:

Type: Manual hydraulic hose crimper machine

Application:  Compression of the hose connector of the high-pressure oil pipe
Crimping inner diameter : 0.24-1.1 Inch
Number of molds : 8 Sets (10mm, 12mm, 14mm, 16mm, 19mm, 23mm, 27mm, 31mm)

Type of lubricating grease: Manual pump with No. 10 engine oil

 

Product Description​:

【8 SIZES OF DIES】 The eight-flap seat in the hydraulic hose crimping tool is forged with chrome 12 material and hardened by heat treatment, which is more wear-resistant and precise, and the snap-on dies. (10/12/14/16/19/23/27/31mm) can bite with the eight-flap seat perfectly and firmly, which can provide the stability for the crimped hose, crimping range 0.24"-1.1".
【CHROME 12 MATERIAl】The head is made of chrome 12 high hardness material, wear-resistant, built-in double-layer dust-proof with long life, the bottom of the machine is made of stainless steel, rust-resistant and corrosion-resistant, compact structure, easy to operate and maintain, the hose crimper comes with a 8 drawer box design for placing the molds, saving space.
【APPLICABLE SCENARIO】 It can be easily taken to any place, the ac hose crimper is suitable for all kinds of mechanical high and low pressure oil pipe, air pipe, water pipe, cable connector. Specifically designed for field service work when repairs and or final installs must be made on-site. If you have any questions about the product, please feel free to contact us.

 

Package List:

1 x Hydraulic Hose Crimping Machine with 8 sets Magnetic Dies

 

Notes:

The mold is of the sliding slot type and is a non-magnetic mold. After receiving the product, you need to tighten the air release valve, turn on the inflation switch, adjust the limiter to the far left, and the light should be normally on. Then you can use it normally. The error can be adjusted by the limiter.

Due to manual measurement,please allow a little error and make sure you do not mind before ordering.

Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object.

Please take the real one as standard.

PaymentShipmentWarrenty & RMAService & Contact

Usually we arrange shipping in 3 business day after payment confirmed.
Orders will be shipped out via Carrier USPS or FedEx .

Delivery time :

When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

Warranty for defective items (excluding items damaged and/or misused after receipt).
In order to return an item you must contact us to request a RMA No.
Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

We hope you have a pleasant shopping experience with us and satisfy 100%.
If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
Usually, we response your email in 1 business day.

[ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

All rights reserved.

On Feb 4, 2026 at 18:36:28 PST, seller added the following information: